ZNB4

Широкий динамический диапазон до 140 дБ

Малое время развертки, например 4 мс для 401 точки

Высокая температурная стабильность на типичном уровне 0,01 дБ/°C

Широкий диапазон развертки по мощности (98 дБ)

Широкая полоса ПЧ от 1 Гц до 10 МГц

Ручная и автоматическая калибровка

Большой экран высокого разрешения с диагональю 12,1 дюйма

Пользовательский интерфейс с сенсорным экраном

Два или четыре порта

Четырехпортовая модель с двумя независимыми генераторами

Расширение до 48 портов с использованием матричных коммутаторов

Опции

Bias tees for four-port R&S®ZNB4/R&S®ZNB8 R&S®ZNB-B1 100 kHz to 4.5/8.5 GHz 1316.1700.04
Receiver step attenuator, port 1, for R&S®ZNB4 R&S®ZNB4-B31 9 kHz to 4.5 GHz 1316.0185.02
Receiver step attenuator, port 2, for R&S®ZNB4 R&S®ZNB4-B32 9 kHz to 4.5 GHz 1316.0179.02
Receiver step attenuator, port 3, for R&S®ZNB4 R&S®ZNB4-B33 9 kHz to 4.5 GHz 1316.0262.02
Receiver step attenuator, port 4, for R&S®ZNB4 R&S®ZNB4-B34 9 kHz to 4.5 GHz 1316.0433.02
Extended power range for two-port R&S®ZNB4 R&S®ZNB4-B22 9 kHz to 4.5 GHz 1316.0210.02
Extended power range for four-port R&S®ZNB4 R&S®ZNB4-B24 9 kHz to 4.5 GHz 1316.0233.02
Extended dynamic range for two-port R&S®ZNB42) R&S®ZNB4-B52 9 kHz to 4.5 GHz 1319.4975.02
Extended dynamic range for four-port R&S®ZNB42) R&S®ZNB4-B54 9 kHz to 4.5 GHz 1319.4981.02
Receiver step attenuator, port 1, for R&S®ZNB8 R&S®ZNB8-B31 9 kHz to 8.5 GHz 1316.0191.02
Receiver step attenuator, port 2, for R&S®ZNB8 R&S®ZNB8-B32 9 kHz to 8.5 GHz 1316.0204.02
Receiver step attenuator, port 3, for R&S®ZNB8 R&S®ZNB8-B33 9 kHz to 8.5 GHz 1316.0162.02
Receiver step attenuator, port 4, for R&S®ZNB8 R&S®ZNB8-B34 9 kHz to 8.5 GHz 1316.0440.02
Extended power range for two-port R&S®ZNB8 R&S®ZNB8-B22 9 kHz to 8.5 GHz 1316.0227.02
Extended power range for four-port R&S®ZNB8 R&S®ZNB8-B24 9 kHz to 8.5 GHz 1316.0240.02
Extended dynamic range for two-port R&S®ZNB82) R&S®ZNB8-B52 9 kHz to 8.5 GHz 1319.4998.02
Extended dynamic range for four-port R&S®ZNB82) R&S®ZNB8-B54 9 kHz to 8.5 GHz 1319.5007.02
Extended power range for two-port R&S®ZNB20 R&S®ZNB20-B22 100 kHz to 20 GHz 1317.8950.02
Extended power range for four-port R&S®ZNB20 R&S®ZNB20-B24 100 kHz to 20 GHz 1317.8967.02
Extended power range for two-port R&S®ZNB40 R&S®ZNB40-B22 100 kHz/10 MHz 3) to 40 GHz 1317.8973.02
Extended power range for four-port R&S®ZNB40 R&S ZNB40-B24 100 kHz to 40 GHz 1332.8112.02
Second internal generator for R&S®ZNB4/R&S®ZNB84) R&S®ZNB-B2 9 kHz to 8.5 GHz 1317.7954.02
Second internal generator for R&S®ZNB204) R&S®ZNB20-B2 100 kHz to 20 GHz 1317.8980.02
Second internal generator for R&S®ZNB404) R&S®ZNB40-B2 100 kHz to 40 GHz 1332.8129.02
Precision frequency reference R&S®ZNB-B4 1316.1769.02
GPIB interface R&S®ZNB-B10 1311.5995.02
Device control 5) R&S®ZNB-B12 1319.5088.02
Direct control cable 5) R&S®ZN-B121 1323.9290.00
Handler I/O (universal interface) R&S®ZN-B14 1316.2459.02
GPIO interface 6) R&S®ZN-B15 1323.9355.02
DC inputs R&S®ZNB-B81 1316.0004.02
Time domain analysis R&S®ZNB-K2 1316.0156.02
Extended time domain analysis 7) R&S®ZNB-K20 1326.8072.02
1) Cannot be combined with R&S®ZN-B15. 2) Cannot be combined with R&S®ZNB-B1 or R&S®ZNB4-B3x/R&S®ZNB8-B3x. 3) Start frequency depends on frequency range of R&S®ZNB40 base unit. 4) Requires R&S®ZNB four-port model. 5) Required for direct control of R&S®ZN-Z84 matrices. 6) Cannot be combined with R&S®ZNB-B1. 7) Requires R&S®ZNB-K2. 18 Designation Type Frequency range Order No. Distance to fault R&S®ZNB-K3 1350.5057.02
Frequency conversion8) R&S®ZNB-K4 1316.2994.02
Intermodulation measurements 9) R&S®ZNB-K14 1317.8373.02
10 MHz receiver bandwidth R&S®ZNB-K17 1316.1881.02
1 mHz frequency resolution R&S®ZNB-K19 1317.8573.02
USB-to-IEC/IEEE adapter R&S®ZVAB-B44 1302.5544.02
Accessories Calibration kits (manual calibration) Calibration kit, N, 50 Ω R&S®ZCAN 0 Hz to 3 GHz 0800.8515.52
Calibration kit, 2.92 mm (m) R&S®ZN-Z129 0 Hz to 40 GHz 1328.8140.02
Calibration kit, 2.92 mm (f) R&S®ZN-Z129 0 Hz to 40 GHz 1328.8140.03 Calibration kit, 2.92 mm (m) R&S®ZN-Z129E 0 Hz to 44 GHz 1328.8170.02
Calibration kit, 2.92 mm (f) R&S®ZN-Z129E 0 Hz to 44 GHz 1328.8170.03 Calibration kit, 3.5 mm (m) R&S®ZN-Z1135 0 Hz to 26.5 GHz 1328.8157.02
Calibration kit, 3.5 mm (f) R&S®ZN-Z1135 0 Hz to 26.5 GHz 1328.8157.03 Calibration kit, N, (m) R&S®ZN-Z170 0 Hz to 18 GHz 1328.8163.02
Calibration kit, N, (f) R&S®ZN-Z170 0 Hz to 18 GHz 1328.8163.02
Calibration kit, N, 50 Ω R&S®ZV-Z270 0 Hz to 18 GHz 5011.6536.02
Calibration kit, 3.5 mm R&S®ZN-Z235 0 Hz to 26.5 GHz 1336.8500.02
Calibration kit, 2.92 mm R&S®ZN-Z229 0 Hz to 43.5 GHz 1336.3502.02
Calibration units (automatic calibration) Calibration unit, two ports, SMA (f) R&S®ZN-Z151 100 kHz to 8.5 GHz 1317.9134.32
Calibration unit, two ports, N (f) R&S®ZN-Z151 100 kHz to 8.5 GHz 1317.9134.72
Calibration unit, six ports, SMA (f) R&S®ZN-Z152 100 kHz to 8.5 GHz 1319.6003.36
Calibration unit, four ports, SMA (f) R&S®ZN-Z153 100 kHz to 8.5 GHz 1319.6178.34
Calibration unit, six ports, SMA (f) R&S®ZN-Z154 100 kHz to 8.5 GHz 1319.5120.02
Additional ports 7 to 12, SMA (f) R&S®ZNZ154-B22 100 kHz to 8.5 GHz 1319.5136.22
Additional ports 13 to 18, SMA (f) R&S®ZNZ154-B32 100 kHz to 8.5 GHz 1319.5136.32
Additional ports 19 to 24, SMA (f) R&S®ZNZ154-B42 100 kHz to 8.5 GHz 1319.5136.42
Calibration unit, two ports, 3.5 mm (f) R&S®ZN-Z50 9 kHz to 9 GHz 1335.6904.30
Calibration unit, two ports, 3.5 mm (f) R&S®ZN-Z50 9 kHz to 26.5 GHz 1335.6904.32
Calibration unit, two ports, 3.5 mm (f) R&S®ZN-Z51 100 kHz to 8.5 GHz 1319.5507.32
Calibration unit, four ports, 3.5 mm (f) R&S®ZN-Z51 100 kHz to 8.5 GHz 1319.5507.34
Calibration unit, two ports, N (f) 10) R&S®ZN-Z51 100 kHz to 8.5 GHz 1319.5507.72
Calibration unit, four ports, N (f) 10) R&S®ZN-Z51 100 kHz to 8.5 GHz 1319.5507.74
Calibration unit, four ports, 3.5 mm (f) R&S®ZN-Z52 100 kHz to 26.5 GHz 1335.6991.30
Calibration unit, two ports, 3.5 mm (f) R&S®ZN-Z53 100 kHz to 26.5 GHz 1335.7046.32
Calibration unit, two ports, N (f) R&S®ZN-Z53 100 kHz to 18 GHz 1335.7046.72
Calibration unit, two ports, 2.92 mm (f) R&S®ZN-Z54 9 kHz to 40 GHz 1335.7117.92
Calibration unit, eight ports, N (f) R&S®ZV-Z58 300 kHz to 8 GHz 1164.0638.78
Calibration unit, six ports, 3.5 mm (f) R&S®ZV-Z59 10 MHz to 20 GHz 1164.0450.36
Switch matrices Switch matrix, 8.5 GHz, 2 VNA ports to 6 test ports, base unit, SMA (f) 11) R&S®ZN-Z84 10 MHz to 8.5 GHz 1319.4500.02
Additional test ports 7 to 12, 4 VNA ports 12) R&S®ZN-Z84-B24 10 MHz to 8.5 GHz 1319.4969.24
Additional test ports 7 to 12, 2 VNA ports 12) R&S®ZN-Z84-B22 10 MHz to 8.5 GHz 1319.4969.22
Additional test ports 13 to 18, 4 VNA ports 13) R&S®ZN-Z84-B34 10 MHz to 8.5 GHz 1319.4969.34
Additional test ports 13 to 18, 2 VNA ports 13) R&S®ZN-Z84-B32 10 MHz to 8.5 GHz 1319.4969.32
Additional test ports 19 to 24, 4 VNA ports 14) R&S®ZN-Z84-B44 10 MHz to 8.5 GHz 1319.4969.44
Additional test ports 19 to 24, 2 VNA ports 14) R&S®ZN-Z84-B42 10 MHz to 8.5 GHz 1319.4969.42
Switch matrix, 20 GHz, 2 VNA ports to 6 test ports, base unit, SMA (f) 15) R&S®ZN-Z85 10 MHz to 20 GHz 1326.4777.03
Additional test ports 7 to 12, 4 VNA ports 16) R&S®ZN-Z85-B24 10 MHz to 20 GHz 1326.4831.26
Rohde&Schwarz R&S®ZNB Vector Network Analyzer 19 Designation Type Frequency range Order No. Test cables N (m)/N (m), 50 Ω, length: 0.6 m/1 m R&S®ZV-Z91 0 Hz to 18 GHz 1301.7572.25/.38
N (m)/N (m), 50 Ω, length: 0.6 m/0.9 m R&S®ZV-Z191 0 Hz to 18 GHz 1306.4507.24/.36
N (m)/3.5 mm (m), 50 Ω, length: 0.6 m/1 m R&S®ZV-Z92 0 Hz to 18 GHz 1301.7589.25/.38
N (m)/3.5 mm (m), 50 Ω, length: 0.6 m/0.9 m R&S®ZV-Z192 0 Hz to 18 GHz 1306.4513.24/.36
3.5 mm (f)/3.5 mm (m), length: 0.6 m/1 m R&S®ZV-Z93 0 Hz to 26.5 GHz 1301.7595.25/.38
3.5 mm (f)/3.5 mm (m), length: 0.6 m/0.9 m/1.5 m R&S®ZV-Z193 0 Hz to 26.5 GHz 1306.4520.24/.36/.60
2.92 mm (f)/2.92 mm (m), length: 0.6 m/1 m R&S®ZV-Z95 0 Hz to 40 GHz 1301.7608.25/.38
2.92 mm (f)/2.92 mm (m), length: 0.6 m/0.9 m R&S®ZV-Z195 0 Hz to 40 GHz 1306.4536.24/.36
Hardware add-ons 19" rackmount kit, 2 HU (e.g. for the R&S®ZN-Z84) R&S®ZZA-KN2 1175.3010.00
19" rackmount kit, 5 HU (e.g. for the R&S®ZNB) R&S®ZZA-KN5 1175.3040.00
RF cable set, N (m)/3.5 mm (m), for connecting two 2 × N‑port R&S®ZN-Z84 switch matrices to a four-port R&S®ZNB4 or R&S®ZNB8 R&S®ZN-Z28 10 MHz to 8.5 GHz 1326.6605.02
Additional removable hard disk, 500 Gbyte, 32 bit, for LPW10 R&S®ZNB-B19 1323.9490.02
Additional removable hard disk, 500 Gbyte, 64 bit, for LPW10 R&S®ZNB-B19 1323.9490.07
Additional removable hard disk, 500 Gbyte, 64 bit, for LPW11 R&S®ZNB-B19 1323.9490.10
Additional removable SSD, 512 Gbyte, Win 10 for LPW11 R&S®ZNB-B19 1334.3860.02